Radiant floor insulation panel

Some of its benefits include that:It employs a very low water discharge temperature (30-45ºC) with respect to traditional radiator systems (70-75ºC).It is environmental-friendly due to its low energy consumption.Underfloor heating screed perimeter expansion edging strip: This is a band of polyethylene foam placed on the emitter tubes due to its heating/cooling functionality which absorbs the dilatations produced by the cement mortar.Radiant floor polyethylene film: It is an anti-humidity barrier between the base floor and the radiant floor emitting surface placed on top of it.With a heat pump system, it can be used as a refreshing floor in summer. It is fixed to the walls of all areas to be heated from the base floor to the upper level of the pavement.Radiant floor pipes: To carry out the laying of circuits from the collectors, plastic pipes with oxygen diffusion barrier are used.

As a reference, a conventional radiator installation uses a water temperature of about 70°C.Some main elements to install in radiant floor heating systemRadiant floor collector boxes: They are the collectors from where the radiant floor circuits start, and they are usually embedded in the wall.It needs a height of 10-12 cm, so it is not possible to install it in all cases. Insulating panels are used for this purpose on which the pipes are installed. Likewise, we will indicate how it works and what are its advantages.Why is the radiant floor an efficient system?Both from the economic and comfort point of view, the radiant floor heating systemsare the most efficient system.

It is the heating system that uses the lowest water flow temperature.Radiant floor insulation panel: This is the thermal insulation of the system.It is a system that provides great comfort to users by completely eliminating the inconvenience caused by other air conditioning systems (air currents, stratification, dryness, etc.Are you looking to include this technology in your home construction or rehabilitation? Then you should contactConquer Plumbing for an efficient and timely underfloor heating solution.How does a floor heating system work?With this system, the air temperature at the height of the feet is slightly higher than the air temperature at the height of the head.It consists of a network of cross-linked polyethylene or polybutylene pipes, which are installed under the pavement and a layer of self-leveling mortar through which hot water circulates at a temperature between 30ºC and 45ºC. It is essential for any radiant floor heating installation.

They are usually polyethylene or polybutylene pipes and are specially made for this heating system.As it is a low-temperature system, great savings are achieved by combining it mist sprayer Suppliers with efficient heat generation systems such as aerothermal, geothermal, low temperature or condensing boilers and solar thermal energy. It is not suitable in places where it needs to be tued off and on every day.It is a system that works continuously.. It can come incorporated in the insulating panel. It is usually installed when there is a lack of moisture in the floor/slab.What should we take into account during a radiant floor installation?As we have seen previously, the underfloor heating system is one of the best heating systems on the market, but it is advisable to take into account some considerations:In combination with efficient heat systems, it requires a medium-high initial investment, with respect to other heating systems (such as radiators), but with short-term investment retus.).

For this, it is necessary to carry out a preliminary study for its adaptation, both in new construction and in rehabilitation.When a new construction project starts or the rehabilitation of a building begins, we always ask ourselves: what is the most adequate heating system and what should we consider before installing radiant floor heating systems?In this article, we will explain the reasons why a radiant floor heating system is ideal for obtaining great comfort and energy conservation。